SPS730 & SPS930 Universal

SPS730 & SPS930 Universal

Leading the industry in accuracy, range and reliability, Trimble® Universal Total Stations can assist with fine grading, paving, stockpile scanning and site measurements. With Trimble Universal Total Stations you will get the best performance for jobs requiring tight precision and fast update rates.

Trimble Universal Total Stations use Multitrack™ technology to lock on and track passive prisms for control measurements. For grade control and paving applications, Multitrack technology locks onto active prism targets. This technology will help you increase productivity and get your to grade faster by preventing costly delays and rework.

SPSx30 User Guide

High speed MagDrive™ technology allows for faster grading closer to the total station by turning the instruments up to 115° per second. MagDrive also offers fast pointing, aiming and tracking as well as slow motion controls for manual aiming for measurement tasks.

Trimble Universal Total Stations use SurePoint™ technology to automatically correct horizontal and vertical angles and instrument pointing for mislevelment of the instrument so your measurements will be accurate even if you don’t set up the instrument perfectly level.

Fixed, low latency, synchronized data and a 20 Hz update rate is provided by Trimble Universal Total Stations so you can reliably track a machine target and know that the data being passed from the instrument to the machine is done as quickly and as accurately as possible. Real-time fine grading can be done to millimeter accuracy for motor grader and dozer applications, while increasing productivity by reducing rework.

Universal Total Stations use 3 Hz DR scanning for super fast scanning for vertical/sloping profile measurements and stockpile scans to significantly reduce the time it takes to measure material stockpile volumes or profile rock faces safely.

Two models, the SPS730 and SPS930, are available in two models to best meet your needs and level of functionality. The SPS730 and SPS930 Universal Total Stations from Trimble can be used for:

  • Smaller construction sites or combined with GNSS on larger sites
  • Tasks where the accuracy requirements are very tight: 3 millimeters (0.01 feet)
  • Measuring dangerous or inaccessible locations
  • High precision machine control and guidance
  • Reflectorless measurement of stockpiles, rock faces, cuttings and structures
  • Layout of structures, foundations, caissons and piles
  • Tunnel measurement
  • As-built records and grade checks on laid material
Join Waitlist We will inform you when the product arrives in stock. Just leave your valid email address below.
Email Quantity We won't share your address with anybody else.